Warning: Minimum system requirements were not met.Tim may fail to meet the performance specifications on this hardware. See /root/syscheck.txt and the compatibility guide for hardware details and help.

Document ID : KB000017735
Last Modified Date : 14/02/2018
Show Technical Document Details

Problem:

A warning message appears in the TIM post-install system check report indicating a mismatch. The message reads: "Warning: Minimum system requirements were not met".

Environment:

APM 9.6

Cause:

When a custom mount path is used for the TIM installation instead of the default path, the warning message below is returned:

"Warning: Minimum system requirements were not met. Tim may fail to meet the performance specifications on this hardware.
See /root/syscheck.txt and the compatibility guide for hardware details and help."

Per the current design, TIM is using the root mount path (i.e. /) for disk size calculation. Consequently, there is a mismatch on the system check report.
This error results in no functionality loss. The details in this case can be manually checked using "df -h" command.

Resolution:

Use the default root mount path. You can also check manually using "df-h" command. There is no functionality loss because of this error message.

Figure 1