Servicing the product; warning messages during build

Document ID : KB000127108
Last Modified Date : 14/02/2019
Show Technical Document Details
Issue:
I am receiving the following messages when doing VMFBLD:

VMFUTL2221W Build requisite NUCBL51.BLDLIST for object VMYSYS.MODULE in build list VMYBLSVM does not exist
VMFUTL2070W Build list NUCBL48 is not in the :BLD section of product parameter file VMOPER PPF (compname VMOPERSFS)
VMFUTL2070W Build list NUCBL51 is not in the :BLD section of product parameter file VMOPER PPF (compname VMOPERSFS)
VMFBLD2180I There are 0 build requirements remaining
Resolution:
PTF RO99135 updates VM:Operator 3.1 to Common Nucleus Level 5.1 from 4.8 *and* requires a PPF rebuild.

The 2070W warning VMFUTL2070W Build list NUCBL48 is not in the :BLD section of product
can be ignored because the NUCBL48 buildlist was intentionally removed and replaced by the NUCBL51 buildlist.

 
Additional Information:
Here are the steps to rebuild the PPF: 

#1 
vmfsetup zvmy031a vmoper ( link 


#2 
vmfrec info ( env RO99135 


#3 
vmfrec ppf zvmy031a vmoper ( env RO99135 


#4 
vmfapply ppf zvmy031a vmoper 


#5 
vmfbld ppf zvmy031a vmoper ( status 

VMFUTL2767I Reading VMFINS DEFAULTS X for additional options 
VMFBLD2760I VMFBLD processing started 
VMFBLD2185R The following source product parameter files have been serviced: 
VMFBLD2185R ZVMY031A $PPF 
VMFBLD2185R When source product parameter files are serviced, all product parameter files built from them must be recompiled using VMFPPF before VMFBLD can be run. 

VMFBLD2185R Enter zero (0) to have the latest levels of the source product parameter files copied to your A-disk and exit VMFBLD so you can recompile your product parameter files with VMFPPF 

Enter one (1) to continue only if you have already recompiled your product parameter files with VMFPPF 


** 0 **** Enter 0 here 


VMFBLD2188I Building ZVMY031A $PPF on 191 (A) 
VMFBLD2760I VMFBLD processing completed 
Ready(00500); 


#6 
vmfbld ppf zvmy031a vmoper ( serviced 

VMFUTL2767I Reading VMFINS DEFAULTS X for additional options 
VMFBLD2760I VMFBLD processing started 
VMFBLD2185R The following source product parameter files have been serviced: 
VMFBLD2185R ZVMY031A $PPF 
VMFBLD2185R When source product parameter files are serviced, all product parameter files built from them must be recompiled using VMFPPF before VMFBLD can be run. 

VMFBLD2185R Enter zero (0) to have the latest levels of the source product parameter files copied to your A-disk and exit VMFBLD so you can recompile your product parameter files with VMFPPF 

Enter one (1) to continue only if you have already recompiled your product parameter files with VMFPPF 


** 0 **** Enter 0 again here 


VMFBLD2188I Building ZVMY031A $PPF on 191 (A) 

VMFBLD2760I VMFBLD processing completed 
Ready(00500); 


**** the first time you receive msg VMFBLD2185R, you must respond with 0 (zero). 

Now you must run VMFPPF to rebuild the ZVMY031A PPF file. 


Now enter: 

vmfppf zvmy031a as shown here: 


#7 
vmfppf zvmy031a 
VMFPPF2602R The following components can be compiled for ZVMY031A $PPF. 
Enter the numbers of your choices separated by blanks 
(1) VMOPER 
(2) VMOPERSFS 
(3) All the components 
(4) Exit 


** 3 ? ......enter 3 for All the components 



Now, after rebuilding the ZVMY031A PPF file which you just did above, rerun the VMFBLD step. When you receive the prompt again, this time respond ONE (1) to continue with the 
VMFBLD process and it should complete successfully. 


Now issue vmfbld again as shown here: 

#8 
vmfbld ppf zvmy031a vmoper ( serviced 


#9 
VMDEPLOY VMOPER PRIMARY