.NET Agent installation problems - Checklist

Document ID : KB000020090
Last Modified Date : 14/02/2018
Show Technical Document Details
  1. Make sure you are using the correct .NET agent installer package.

    For v9.1, you can use the 64bit installer to monitor both 32 and 64bits applications.
    For v8.x and 9.0.x: Officially, you cannot instrument both 32 and 64bits at the same time, make sure to use the correct installer or agent package.

  2. Check for possible errors in the install log:

    For v8.x and 9.0.x: AGENT_HOME\wily\install\Introscope_Agent_for_.NET_x.x.x.x_InstallLog.log
    For v9.1: install log is on the same location as the installer

  3. Make sure the correct version of wily.Agent.dll has been registered in the GAC (c:\windows\assembly). If not listed, you need to register it manually:

    1. Execute: explorer C:\Windows\assembly
    2. Execute: explorer AGENT_HOME\wily\bin
    3. Drag and drop wily.Agent.dll from AGENT_HOME\wily\bin into C:\Windows\assembly


  4. If CLR is v4, set introscope.nativeprofiler.clrv4.transparency.checks.disabled=true, restart IIS, and try again. The .NET 4 CLR has some additional checks on certain assemblies which may invalidate instrumented code, thus throwing VerificationException. This agent profile setting will suppress these checks when set to true.

  5. Make sure permissions to the AGENT_HOME have been set accordingly.
    First, access/launch the .NET application, then execute AGENT_HOME\wily\wilypermission.exe, for example:

    If you are trying to instrument a window service or standalone app:
    <AGENT_HOME>\wily\wilypermission.exe <AGENT_HOME>\wily <mytestapp.exe>

    For IIS:
    <AGENT_HOME>\wily\wilypermission.exe <AGENT_HOME>\wily
    the output will tell you if there is a problem with permissions.

    NOTE: For v9.1 agent, this step is not longer required.

  6. Verify that the required environment variables exit:

    Cor_Enable_Profiling=0x1
    COR_PROFILER={5F048FC6-251C-4684-8CCA-76047B02AC98}
    com.wily.introscope.agentprofile=<install_dir>\wily\IntroscopeAgent.profile

  7. Check for any error messages in the Windows event viewer when starting the application, below some common examples:

    "Failed To Co CreateProfiler"
    "The profiler was loaded successfully. Profiler CLSID: '{D6E0BA92-3BC3-45ff-B9CC-B4B5AB7190BC}

    The above messages indicate that there is other CLR profilers preventing the .NET Agent from probing the monitored .NET process.
    APM .NET Agent COR_PROFILER GUID is {5F048FC6-251C-4684-8CCA-76047B02AC98}
    Open the regedit, search for "COR_PROFILER" or the CLSID and disable or uninstall any other .NET monitoring tool.

    A very common situation we can see is conflicts with Avicode application. see

    https://support.ca.com/irj/portal/anonymous/redirArticles?reqPage=search&searchID=TEC595292

    The solution is to uninstall Avicode.
    NOTE: AVIcode .NET Application Monitoring is a subsidiary of Microsoft. AVIcode technologies enable in-production, always-on root-cause monitoring and analysis of Microsoft .NET Framework-based applications.

  8. If instrumentation is not working, try to configure the agent to instrument all .NET application by commenting the introscope.agent.dotnet.monitorApplications agent property. This will help you confirm that the problem is application related.

  9. If you are trying to instrument an standalone .NET applicaiton, note that NET Agent v9.1 doesn't support anymore using full path in introscope.agent.dotnet.monitorApplications. You should be using instead the process name.
    In addition, please note that this property is case sensitive and wildcards are not supported.

  10. Verify that.NET agent is attached to the .NET process using "tasklist /m". For example: If you are trying to monitor IIS: access to the application, then run tasklist /m
    if Autoprobe instrumentation: "wiily.AutoProbe.dll" and "wily.Agent.dll" will be attached to w3wp.exe.
    If NativeProfiler: "wily.Agent.dll" and "wily.NativeProfiler.dll" will be attached to the process.

    If the problem persists, you should contact CA Support and provide the following information

    1. Zipped content of the AGENT_HOME/install/*.logs
    2. Zipped content of the AGENT_HOME/wily/logs folder
    3. AGENT_HOME/wily/IntroscopeAgent.profile
    4. Screenshot of events from Windows Event viewer.