MIBs not showing after being added to snmptd probe

Document ID : KB000095471
Last Modified Date : 10/05/2018
Show Technical Document Details
Issue:
MIB file loads but no traps display in the snmptd trap browser.
Environment:
- UIM 85.1
- snmptd 3.30, 3.24
- hub/robot 7.91/7.93
- DATA-DOMAIN-MIB
Cause:
- MIB file corruption/size difference from the original file size.
Resolution:
First delete all the instances of the MIB, e.g., DATA-DOMAIN-MIB from the file system: e.g., C:\Program Files (x86)\Nimsoft\MIBSĀ 

In this particular case for this particular MIB, before you load the MIB, make sure it is exactly the same size as it was originally, e.g., 425 KB on the file system when you look in the MIBS directory. If it is a different size, somehow it became corrupted in some way. Also, there should only be 1 MIB file name for the MIB you're trying to load.

In the snmptd probe, delete the MIB using the trap wizard and reload the MIBS on Finish, then reload the NEW correct/original sized MIB file.

Again, there should only be 1 MIB file and it should be the same size as it was originally. If you see the same MIB that is not of the original size, then first delete it from the file system in the MIBS directory before you try to reload the original.

The MIB Trap Names should then show up in the MIB Trap browser.

User-added image